Pike Creek's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across Delaware.
Professional roofing, coating, and insulation services for Pike Creek property owners and facility managers.
Transform your building with a spray foam roof that insulates, waterproofs, and strengthens in a single application. No tear-off required over most existing substrates. Backed by manufacturer warranties and our own workmanship guarantee.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Stop metal roof leaks without replacement. Our elastomeric coating system treats rust, seals every fastener and seam, and creates a continuous waterproof membrane over your entire metal roof — backed by a manufacturer warranty.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Spray foam insulation for crawl space walls, rim joists, and band boards that eliminates moisture, cold floors, and musty odors. Closed-cell foam acts as both insulation and vapor barrier in a single application.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
Even in a community the size of Pike Creek, DE, commercial buildings, warehouses, and agricultural structures need the same high-performance roofing and insulation as facilities in major metros. Lapolla Industries provides spray foam solutions engineered for Delaware conditions — from metal building insulation to flat roof waterproofing — at a price point that makes sense for Pike Creek businesses.
Our Pike Creek crews specialize in spray foam applications that conventional roofers simply cannot do: re-sloping flat roofs to eliminate ponding, insulating metal buildings from the inside out, and restoring aging commercial roofs without the cost and disruption of a full tear-off. If your Pike Creek building has a roof problem, we have a spray foam solution.
Quality, integrity, and results — the Lapolla Industries difference for Pike Creek property owners.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Answers to the most frequently asked spray foam questions from Pike Creek property owners.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Pike Creek homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Yes. Every Pike Creek crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Spray foam insulation costs in Pike Creek typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Pike Creek homeowners see a full return on investment through energy savings within 3 to 5 years.
Spray foam is one of the best solutions for flat and low-slope roofs in Pike Creek. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Pike Creek, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.
Most residential attic insulation projects in Pike Creek are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Real reviews from property owners we have served across the country.
"Called about a ceiling stain that kept growing. They got on the roof, found the leak source at a HVAC curb penetration, and had it sealed within hours. Professional, fast, and the price was exactly what they quoted."
"Our corrugated metal roof was rusting at every fastener and seam. They cleaned the entire surface, treated the rust, and applied a thick elastomeric coating. The roof looks brand new and is completely sealed now."
"We signed up for their annual roof maintenance program for our three commercial buildings. They catch small issues before they become expensive repairs. Last inspection they found a failing pipe boot that would have caused a major leak."
Lapolla Industries proudly serves property owners in these cities near Pike Creek.